
End mill grinders
Seven bench models for regrinding end mills. The X8 takes ball-nose cutters.
- Models
- X1 to X8
- Grinds
- End mills, ball noses
Six lines from the range go on public show for the first time at the Kawacut launch.

Seven bench models for regrinding end mills. The X8 takes ball-nose cutters.
Point grinders for twist drills, and a separate machine for taps.
Touchscreen tapping machines in vertical and universal-arm versions, in three sizes.

SC20 to SC42 in single-millimetre steps, at 1.5 µm runout.
Three bench chamfer machines and one portable model.

Narrow noses for deep mould and die cavities.
Some assembly required.
Scroll to build a BT40 collet chuck.
BT40 taper
7:24 steep taper. The spindle grips here.
Flange
The V-groove is where the tool changer takes hold.
Drive keys
One each side, so the spindle can turn it.
Pull stud
The drawbar pulls on this. Hard.
ER nose
The body that carries the collet.
Marking
Name on the side, so the setter knows what it is.
ER collet
Slotted from both ends, so it closes evenly on the shank.
End mill
The part that actually does the cutting.
Clamping nut
Torqued down. One BT40 ER collet chuck.
Lol, good try!
Go check the website out on a desktop.
kawacut.com