Kawacut
Request a quote
T04 Machines

Drill and tap grinders

Point grinders for twist drills and a dedicated tap grinder.

Part numbers
4
In stock
4
Request a quoteNot listed? Send the drawing
Drill and tap grinders, 4 part numbers
Part numberDescriptionWeightAvailability
DRILL BIT GRINDER MR-26ADrill bit grinder MR-26A—In stock
DRILL BIT GRINDER MR-26DDrill bit grinder MR-26D—In stock
DRILL BIT GRINDER MR-G3Drill bit grinder MR-G3—In stock
TAP GRINDER MR-Y3CTap grinder MR-Y3C—In stock
Kawacut

Some assembly required.

Scroll to build a BT40 collet chuck.

01 / 09

BT40 taper

7:24 steep taper. The spindle grips here.

02 / 09

Flange

The V-groove is where the tool changer takes hold.

03 / 09

Drive keys

One each side, so the spindle can turn it.

04 / 09

Pull stud

The drawbar pulls on this. Hard.

05 / 09

ER nose

The body that carries the collet.

06 / 09

Marking

Name on the side, so the setter knows what it is.

07 / 09

ER collet

Slotted from both ends, so it closes evenly on the shank.

08 / 09

End mill

The part that actually does the cutting.

09 / 09

Clamping nut

Torqued down. One BT40 ER collet chuck.

Lol, good try!

Go check the website out on a desktop.

kawacut.com