Kawacut
Request a quote
T04 Machines

Electric tapping machines

Electric tapping machines with touchscreen control, in vertical and universal-arm versions.

Part numbers
6
In stock
6
Request a quoteNot listed? Send the drawing
Electric tapping machines, 6 part numbers
Part numberDescriptionWeightAvailability
ELECTRIC TAPPING MACHINE MR-DS16 UNIVERSAL ARM TOUCHSCREENElectric tapping machine MR-DS16 universal arm touchscreen31.22 kgIn stock
ELECTRIC TAPPING MACHINE MR-DS16 VERTICAL TOUCHSCREENElectric tapping machine MR-DS16 vertical touchscreen31.42 kgIn stock
ELECTRIC TAPPING MACHINE MR-DS30 UNIVERSAL ARM TOUCHSCREENElectric tapping machine MR-DS30 universal arm touchscreen48.16 kgIn stock
ELECTRIC TAPPING MACHINE MR-DS30 VERTICAL TOUCHSCREENElectric tapping machine MR-DS30 vertical touchscreen48.28 kgIn stock
ELECTRIC TAPPING MACHINE MR-DS36 UNIVERSAL ARM TOUCHSCREENElectric tapping machine MR-DS36 universal arm touchscreen50.54 kgIn stock
ELECTRIC TAPPING MACHINE MR-DS36 VERTICAL TOUCHSCREENElectric tapping machine MR-DS36 vertical touchscreen49.70 kgIn stock
Kawacut

Some assembly required.

Scroll to build a BT40 collet chuck.

01 / 09

BT40 taper

7:24 steep taper. The spindle grips here.

02 / 09

Flange

The V-groove is where the tool changer takes hold.

03 / 09

Drive keys

One each side, so the spindle can turn it.

04 / 09

Pull stud

The drawbar pulls on this. Hard.

05 / 09

ER nose

The body that carries the collet.

06 / 09

Marking

Name on the side, so the setter knows what it is.

07 / 09

ER collet

Slotted from both ends, so it closes evenly on the shank.

08 / 09

End mill

The part that actually does the cutting.

09 / 09

Clamping nut

Torqued down. One BT40 ER collet chuck.

Lol, good try!

Go check the website out on a desktop.

kawacut.com