Kawacut
Request a quote

Application support

The Carbiforce Group's 18 application engineers support Kawacut customers at the machine, on the customer's own component, with results measured in parts per edge.

Book an engineer visit

Diagnose

Tool life, cycle time, rejections and stoppages are separated. Runout and balance at the holder are measured on the spindle itself.

Edge life across one batch

Datasheet average · 400150200250300350400450500550600650
Illustration · parts per edgeHatched: edge life discarded at the planned change
CTC cost of tool per component
What an edge costs, divided across the good parts it makes before it is changed.
CPC cost per component
Machine hour, labour and material, with CTC inside it. A holder is worth buying only if it lowers both.
Kawacut

Some assembly required.

Scroll to build a BT40 collet chuck.

01 / 09

BT40 taper

7:24 steep taper. The spindle grips here.

02 / 09

Flange

The V-groove is where the tool changer takes hold.

03 / 09

Drive keys

One each side, so the spindle can turn it.

04 / 09

Pull stud

The drawbar pulls on this. Hard.

05 / 09

ER nose

The body that carries the collet.

06 / 09

Marking

Name on the side, so the setter knows what it is.

07 / 09

ER collet

Slotted from both ends, so it closes evenly on the shank.

08 / 09

End mill

The part that actually does the cutting.

09 / 09

Clamping nut

Torqued down. One BT40 ER collet chuck.

Lol, good try!

Go check the website out on a desktop.

kawacut.com