Kawacut
Request a quote
T01 Toolholders

Pull studs

Matched to the machine drawbar. 45°, 60° and 90° heads.

Part numbers
5
In stock
4
Request a quoteNot listed? Send the drawing
Pull studs, 5 part numbers
Part numberDescriptionWeightAvailability
PULL STUD BT30-45Pull stud BT30, 45°0.03 kgIn stock
PULL STUD BT30-60Pull stud BT30, 60°0.04 kgIn stock
PULL STUD BT40-45Pull stud BT40, 45°—On order
PULL STUD BT50-60Pull stud BT50, 60°0.30 kgIn stock
PULL STUD BT50-90Pull stud BT50, 90°0.30 kgIn stock
Kawacut

Some assembly required.

Scroll to build a BT40 collet chuck.

01 / 09

BT40 taper

7:24 steep taper. The spindle grips here.

02 / 09

Flange

The V-groove is where the tool changer takes hold.

03 / 09

Drive keys

One each side, so the spindle can turn it.

04 / 09

Pull stud

The drawbar pulls on this. Hard.

05 / 09

ER nose

The body that carries the collet.

06 / 09

Marking

Name on the side, so the setter knows what it is.

07 / 09

ER collet

Slotted from both ends, so it closes evenly on the shank.

08 / 09

End mill

The part that actually does the cutting.

09 / 09

Clamping nut

Torqued down. One BT40 ER collet chuck.

Lol, good try!

Go check the website out on a desktop.

kawacut.com