Kawacut
Request a quote
T03 Workholding

Precision tool vises

Precision tool vises in manual and block-movement types, QGG and QKG series.

Part numbers
17
In stock
17
Request a quoteNot listed? Send the drawing
Precision tool vises, 17 part numbers
Part numberDescriptionWeightAvailability
QGG100Precision tool vise, manual, QGG100—In stock
QGG125Precision tool vise, manual, QGG125—In stock
QGG125APrecision tool vise, manual, QGG125A—In stock
QGG150Precision tool vise, manual, QGG150—In stock
QGG50Precision tool vise, manual, QGG50—In stock
QGG63Precision tool vise, manual, QGG63—In stock
QGG73Precision tool vise, manual, QGG73—In stock
QGG80Precision tool vise, manual, QGG80—In stock
QGG88Precision tool vise, manual, QGG88—In stock
QKG100Precision tool vise, block movement, QKG100—In stock
QKG125Precision tool vise, block movement, QKG125—In stock
QKG150Precision tool vise, block movement, QKG150—In stock
QKG50Precision tool vise, block movement, QKG50—In stock
QKG63Precision tool vise, block movement, QKG63—In stock
QKG73Precision tool vise, block movement, QKG73—In stock
QKG80Precision tool vise, block movement, QKG80—In stock
QKG88Precision tool vise, block movement, QKG88—In stock
Kawacut

Some assembly required.

Scroll to build a BT40 collet chuck.

01 / 09

BT40 taper

7:24 steep taper. The spindle grips here.

02 / 09

Flange

The V-groove is where the tool changer takes hold.

03 / 09

Drive keys

One each side, so the spindle can turn it.

04 / 09

Pull stud

The drawbar pulls on this. Hard.

05 / 09

ER nose

The body that carries the collet.

06 / 09

Marking

Name on the side, so the setter knows what it is.

07 / 09

ER collet

Slotted from both ends, so it closes evenly on the shank.

08 / 09

End mill

The part that actually does the cutting.

09 / 09

Clamping nut

Torqued down. One BT40 ER collet chuck.

Lol, good try!

Go check the website out on a desktop.

kawacut.com