Kawacut
Request a quote
T03 Workholding

Tool locking blocks

Bench fixtures that hold BT30, BT40 and BT50 holders while tools are changed.

Part numbers
3
In stock
3
Request a quoteNot listed? Send the drawing
Tool locking blocks, 3 part numbers
Part numberDescriptionWeightAvailability
BT30 TOOL LOCKING BLOCKTool locking block, BT302.30 kgIn stock
BT40 TOOL LOCKING BLOCKSpecial holder, BT40—In stock
BT50 TOOL LOCKING BLOCKTool locking block, BT504.48 kgIn stock
Kawacut

Some assembly required.

Scroll to build a BT40 collet chuck.

01 / 09

BT40 taper

7:24 steep taper. The spindle grips here.

02 / 09

Flange

The V-groove is where the tool changer takes hold.

03 / 09

Drive keys

One each side, so the spindle can turn it.

04 / 09

Pull stud

The drawbar pulls on this. Hard.

05 / 09

ER nose

The body that carries the collet.

06 / 09

Marking

Name on the side, so the setter knows what it is.

07 / 09

ER collet

Slotted from both ends, so it closes evenly on the shank.

08 / 09

End mill

The part that actually does the cutting.

09 / 09

Clamping nut

Torqued down. One BT40 ER collet chuck.

Lol, good try!

Go check the website out on a desktop.

kawacut.com